Description
The ZN030 ABPROG Programmer is a set of devices, designed to assist with many procedures, which require work on bench with multiple units in the vehicle.
Main functionalities:
- Read, write and erase SPI, Microwire and I2C memories
- Read, write and erase memory of the FEM/BDC without removing it
- Rread and write Bosch EDC16 units (MPC)
- Reading, writing, and erasing of NEC MCUs from Mercedes-Benz IR-keys
- Renew HITAG 2 type keys
- Reading and writing NEC V850 in different modules
- Reading EWS masks
Supported modules:
Supported SPI memories:
ST M35080VP / M35080V6
ST D080D0WQ
ST D160D0WQ
ST M95010
ST M95020
ST M95040
ST M95080
ST M95160
ST M95320
ST M95640
ST M95128
ST M95256
ST ST95P08
Supported Microwire memories:
93C46 8 bit / 16 bit
93C56 8 bit / 16 bit
93C66 8 bit / 16 bit
93C76 8 bit / 16 bit
93C86 8 bit / 16 bit
Supported I2C memories:
24C01
24C02
24C08
24C16
24C32
24C64
24C128
24C256
24C512
24C1024
EEPROM of the FEM/BDC without removing (ZN057 required)
MPC555/556 Flash
MPC555/556 CMF A/B Shadow Rows
MPC533/534/564 CMF Flash
MPC533/534/564 Shadow Row
MPC535/536/565/566 CMF Flash
MPC535/536/565/566 CMF A/B Shadow Rows
MPC5XX External Flash (58BW016XX, AMDXX, Intel28XX, Micron 58BW016XX, Numonyx 58BW016XX, Spansion 29CXX, ST 58BW016XX)
MPC5XX External EEPROM (ST 95640, ST 95320, ST 95160, ST 95080)
UPD70FXXXX PFlash
UPC70F35XX DFlash
DFlash 32KB V850ES
Renault BCM (X95)
Renault HandsFree (X98)
AUDI 8T0959754XX, 4G0959754XX, 4H0959754XX 315 / 868 / 433 MHz
BMW F HUF5XXX, 5WK496XX 868 / 315 / 433 MHz
BMW E 5WK49XXX Remote / Keyless 868 / 315 / 433 MHz
PORSCHE 7PP969753XX 433 / 434 / 315 MHz
VOLVO 5WK4926X 433 / 900 MHz
RENAULT AES, AES KEYLESS, DACIA AES, FLUENCE, MEGANE 3
OPEL ASTRA H, ZAFIRA B, ASTRA J/INSIGNIA
RANGE ROVER 5E0U40247 434MHz
MITSUBISHI G8D 644M
PSA 21676652, E33CI002, E33CI009, E33CI01B
CHRYSLER JEEP DODGE KOBOTO04A
BUICK 13500224(13584825),13500225(13584825) 315MHz
CHEVROLET 135XXXXX
GM KEYLESS 433MHz 5BTN
CADILLAC NBG009768T 315MHZ 5BTN KEYLESS
Mercedes-Benz NEC KEY
0D46J
2D47J
CB101 extension cable.
ZN031 Abprog eeprom BCM - for reading, writing and erasing of SPI, Microwire and I2C memories.
ZN033 NEC MCU adapter - for reading, writing and erasing of NEC MCUs from Mercedes-Benz IR-keys.
ZN034 Abprog flat cable - used for reading and writing different modules such as VAG BCM2 module.
ZN035 Abprog eeprom socket - solution used when reading and writing 8-pin eeprom memories.
ZN045 Abprog programmer
ZN046 Abrites PCF for Abprog is a key renewal adaptor, used to renew Hitag 2 type keys
The required software for all that to work appropriately.
AVDI Interface or active AMS is required to purchase this product.
Dimensions:
7x4x27 cm
User Manual:
https://abrites.com/media/user_manuals/html/abprog-user-manual/index.html?v=1661445409